|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SPA-1526Z 0.7GHz to 2.2GHz 2W InGaP HBT Amplifier Preliminary SPA-1526Z 0.7GHz to 2.2GHz 2W InGaP HBT AMPLIFIER RFMD Green, RoHS Compliant, Pb-Free Product Package: SOF-26 Product Description RFMD's SPA-1526Z is a high linearity single-stage class A Heterojunction Bipolar Transistor (HBT) power amplifier. The SPA-1526Z is made with InGaP-on-GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability. It is well suited for use as a driver stage in macro/micro-cell infrastructure equipment, or as the final output stage in pico-cell infrastructure equipment. It features an input power detector, on/off power control, ESD protection, excellent overall robustness, and a hand reworkable and thermally enhanced SOF-26 package. Optimum Technology Matching(R) Applied GaAs HBT GaAs MESFET InGaP HBT dBc Features P1dB =32dBm @ 2140MHz ACP=-65dBc with 18.4dBm Channel Power @ 2140MHz Low Thermal Resistance Package Power Up/Down Control<1s Robust Class 1C ESD -35.0 -40.0 -45.0 -50.0 -55.0 -60.0 -65.0 -70.0 -75.0 ACP versus Channel Power, Over Frequency, WCDMA 880MHz 1960MHz 2140MHz Applications Macro/Micro-Cell Driver Stage Pico-Cell Output Stage GSM, CDMA, TDSCDMA, WCDMA, IS-95 Single and Multi-Carrier Applications SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MEMS 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 POUT (dBm) Parameter Small Signal Power Gain Min. Specification Typ. 15.4 14.0 13.5 32.5 32.5 32.0 45.5 49.0 49.0 Max. Unit dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dB dB dB mA 885MHz 1960MHz 2140MHz 885MHz 1960MHz 2140MHz 885MHz Condition Output Power at 1dB Compression Output Third Order Intercept Point WCDMA Channel Power -65dBc ACP -55dBc ACP -65dBc ACP -55dBc ACP -65dBc ACP -55dBm ACP Input Return Loss Output Return Loss Noise Figure Quiescent Current (VCC =5V) Operating Voltage Operating Current (VCC =5V), Quiescent Power Up Control Current (VPC =5V) VCC Leakage Current (VCC =5V, VPC =0V) Thermal Resistance (junction to lead) Test Conditions: VCC =5V ICQ =645mA Typ. TL =25C 16.5 20.7 18.6 22.3 18.4 21.3 20.0 14.5 5.5 645 5.0 645 2.1 100 12.0 ZS =ZL =50 5.5 1960MHz 2140MHz 3GPP 3.5, test model 1, 64 DPCH 885MHz 885MHz 1960MHz 1960MHz 2140MHz 2140MHz 1960MHz 1960MHz 1960MHz V mA mA A C/W RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 14 SPA-1526Z Absolute Maximum Ratings Parameter Max Device Current (lCE) *Max Device Voltage (VCC) Power Dissipation Max CW Input Power 50 output load 10:1VSWR output load **Max Modulated (W-CDMA) Input Power 50 output load 10:1VSWR output load Max RF Output Power with 50 output load (Continuous long term operation) Max Junction Temperature (TJ) Operating Temperature Range (TL) Max Storage Temperature ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level 26 18 30 dBm dBm dBm 33 21 dBm dBm Preliminary Rating 1500 6.0 6 Unit mA V W Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 150 -40 to + 85 150 Class 1C MSL 1 C C C *No RF Drive **W-CDMA, 64 DPCH, 1 CH Forward Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: ID VD <(TJ -TL)/RTH, J-l and TL =TLEAD Simplified Device Schematic GND VBias 1 Bias 6 NC 5 RF IN 2 RF OUT / VCC VPC 3 4 VDET GND 2 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D Preliminary Typical RF Performance 850MHz to 910MHz Application Circuit ACP versus Channel Power, 880MHz, WCDMA -35.0 -40.0 -45.0 -50.0 SPA-1526Z ACP versus Channel Power, 880MHz, IS-95 -40.0 -45.0 -50.0 -55.0 -60.0 -40C 25C 85C Source -40C 25C 85C Source dBc dBc -55.0 -60.0 -65.0 -70.0 -75.0 -80.0 13.0 15.0 17.0 19.0 21.0 23.0 25.0 27.0 Source ACPR 3GPP 3.5, 64 DPCH, Peak/Avg.=11dB -65.0 -70.0 -75.0 -80.0 -85.0 -90.0 13.0 15.0 17.0 19.0 21.0 23.0 25.0 27.0 Source ACPR IS-95A 9 Ch Fwd, Peak/Avg=9.1dB Channel Power Out (dBm) Channel Power Out (dBm) ACP versus Channel Power, W-CDMA, 25C -40.0 -45.0 -50.0 -55.0 -55.0 -60.0 ACP versus Channel Power, IS-95, 25C -40.0 -45.0 -50.0 2.11GHz 2.14GHz 2.17GHz System .85Ghz .88Ghz .91GHz Source dBc dBc -60.0 -65.0 -70.0 -65.0 -70.0 -75.0 -80.0 -75.0 Source ACPR -80.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 3GPP 3.5, 64 DPCH, Peak/Avg.=11dB -85.0 -90.0 13.0 Source ACPR IS-95A 9 Ch Fwd, Peak/Avg=9.1dB 15.0 17.0 19.0 21.0 23.0 25.0 27.0 P1dB versus Frequency 37.0 36.0 35.0 34.0 33.0 Channel Power Out (dBm) OIP3 versus Frequency, 22dBm/Tone 50.0 49.0 48.0 47.0 46.0 Channel Power Out (dBm) -40C 25C 85C -40C 25C 85C dBm dBm 32.0 31.0 30.0 29.0 28.0 27.0 0.85 0.86 0.87 0.88 0.89 0.90 0.91 45.0 44.0 43.0 42.0 41.0 40.0 0.85 0.86 0.87 0.88 0.89 0.90 0.91 Frequency (GHz) Frequency (GHz) EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 14 SPA-1526Z Typical RF Performance 850MHz to 910MHz Application Circuit S11 versus Frequency 0.0 Preliminary S21 versus Frequency 25.0 -5.0 20.0 -40C 25C 85C -10.0 S11 (dB) -15.0 S21 (dB) -40C 25C 85C 15.0 10.0 -20.0 5.0 -25.0 -30.0 700 750 800 850 900 950 1000 0.0 700 750 800 850 900 950 1000 Frequency (MHz) Frequency (MHz) S12 versus Frequency 0.0 -5.0 -10.0 -15.0 -10.0 S22 versus Frequency 0.0 -40C 25C 85C -5.0 S22 (dB) S12(dB) -20.0 -25.0 -30.0 -35.0 -40.0 700 750 800 850 900 950 1000 -15.0 -20.0 -40C 25C 85C -25.0 -30.0 700 750 800 850 900 950 1000 Frequency (MHz) Frequency (MHz) Noise Figure, 5V, 25C 10.0 1.5 1.4 9.0 1.3 VDETECT versus Output Power @880MHz -40C 25C 85C NF (dB) 8.0 VDETECT (V) 1.2 1.1 1.0 7.0 6.0 0.9 5.0 850 860 870 880 890 900 910 0.8 5.0 10.0 15.0 20.0 25.0 30.0 35.0 Frequency (MHz) Power Out (dBm) 4 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D Preliminary Typical RF Performance 1930MHz to 1960MHz Application Circuit ACP versus Channel Power, 1960MHz, W-CDMA -40.0 -45.0 -50.0 -55.0 -55.0 -60.0 SPA-1526Z ACP versus Channel Power, 1960MHz, IS-95 -40.0 -45.0 -50.0 -40C 25C 85C System -40C 25C 85C Source dBc dBc -60.0 -65.0 -70.0 -65.0 -70.0 -75.0 -80.0 -75.0 -80.0 10.0 Source ACPR 3GPP 3.5, 64 DPCH, Peak/Avg.=11dB -85.0 -90.0 Source ACPR IS-95A 9 Ch Fwd, Peak/Avg=9.1dB 12.0 14.0 16.0 18.0 20.0 22.0 24.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 Channel Power Out (dBm) Channel Power Out (dBm) ACP versus Channel Power, W-CDMA, 25C -40.0 -45.0 -50.0 -55.0 ACP versus Channel Power, IS-95, 25C -40.0 -45.0 -50.0 -55.0 -60.0 1.93Ghz 1.96Ghz 1.99GHz System 1.93Ghz 1.99GHz 1.96Ghz Source dBc dBc Source ACPR 3GPP 3.5, 64DPCH, Peak/Avg.=11dB -60.0 -65.0 -70.0 -75.0 -80.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 -65.0 -70.0 -75.0 -80.0 -85.0 -90.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 Source ACPR IS-95A 9 Ch Fwd, Peak/Avg=9.1dB Channel Power Out (dBm) Channel Power Out (dBm) P1dB versus Frequency 37.0 36.0 35.0 34.0 33.0 OIP3 versus Frequency, 22dBm/tone 52.0 51.0 50.0 49.0 48.0 -40C 25C 85C dBm dBm 32.0 31.0 30.0 29.0 28.0 27.0 1.93 1.94 1.95 1.96 1.97 1.98 1.99 47.0 46.0 45.0 44.0 43.0 42.0 1.93 1.94 1.95 1.96 1.97 1.98 1.99 -40C 25C 85C Frequency (GHz) Frequency (GHz) EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 14 SPA-1526Z Typical RF Performance 1930MHz to 1990MHz Application Circuit S11 versus Frequency 0.0 Preliminary S21 versus Frequency 25.0 -5.0 -40C 25C 85C 20.0 -40C 25C 85C -10.0 S11 (dB) -15.0 S21 (dB) 15.0 10.0 -20.0 5.0 -25.0 -30.0 1800 1850 1900 1950 2000 2050 2100 0.0 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) Frequency (MHz) S12 versus Frequency 0.0 -5.0 -10.0 S22 versus Frequency 0.0 -40C 25C 85C -5.0 -40C 25C 85C -10.0 S12(dB) -15.0 -20.0 -25.0 -30.0 -35.0 1800 1850 1900 1950 2000 2050 2100 S22 (dB) -15.0 -20.0 -25.0 -30.0 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) Frequency (MHz) Noise Figure, 5V 25C 8.0 1.5 1.4 7.0 1.3 6.0 VDETECT versus Output Power @1960MHz -40C 25C 85C VDETECT (V) NF (dB) 1.2 1.1 1.0 5.0 4.0 0.9 3.0 1930 1940 1950 1960 1970 1980 1990 0.8 5.0 10.0 15.0 20.0 25.0 30.0 35.0 Frequency (MHz) Power Out (dBm) 6 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D Preliminary Typical RF Performance 2110MHz to 2170MHz Application Circuit ACP versus Channel Power, 2140MHz, W-CDMA -40.0 -45.0 -50.0 -55.0 SPA-1526Z ACP versus Channel Power, W-CDMA, 25C -40.0 -45.0 -50.0 -55.0 -40C 25C 85C System 2.11GHz 2.14GHz 2.17GHz System dBc dBc Source ACPR 3GPP 3.5, 64 DPCH, Peak/Avg.=11dB -60.0 -65.0 -70.0 -75.0 -80.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 -60.0 -65.0 -70.0 -75.0 Source ACPR -80.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 3GPP 3.5, 64 DPCH, Peak/Avg.=11dB Channel Power Out (dBm) Channel Power Out (dBm) P1dB versus Frequency 37.0 36.0 35.0 34.0 33.0 OIP3 versus Frequency, 22dBm/Tone 54.0 53.0 52.0 51.0 50.0 -40C 25C 85C -40C 25C 85C dBm dBm 32.0 31.0 30.0 29.0 28.0 27.0 2.11 2.12 2.13 2.14 2.15 2.16 2.17 49.0 48.0 47.0 46.0 45.0 44.0 2.11 2.12 2.13 2.14 2.15 2.16 2.17 Frequency (GHz) Frequency (GHz) Noise Figure, 5V, 25C 8.0 VDETECT versus Output Power @ 2140MHz 1.5 1.4 7.0 -40C 25C 85C 1.3 6.0 VDETECT (V) NF (dB) 1.2 1.1 1.0 5.0 4.0 0.9 3.0 2110 2120 2130 2140 2150 2160 2170 0.8 5.0 10.0 15.0 20.0 25.0 30.0 35.0 Frequency (MHz) Power Out (dBm) EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 7 of 14 SPA-1526Z Typical RF Performance 2110MHz to 2170MHz Application Circuit S11 versus Frequency 0.0 Preliminary S21 versus Frequency 25.0 -5.0 -40C 25C 85C 20.0 -40C 25C 85C -10.0 S11 (dB) -15.0 S21 (dB) 15.0 10.0 -20.0 5.0 -25.0 -30.0 2000 2050 2100 2150 2200 2250 2300 0.0 2000 2050 2100 2150 2200 2250 2300 Frequency (MHz) Frequency (MHz) S12 versus Frequency 0.0 -5.0 -10.0 S22 versus Frequency 0.0 -40C 25C 85C -5.0 -40C 25C 85C -10.0 S12(dB) -15.0 -20.0 -25.0 -30.0 -35.0 2000 2050 2100 2150 2200 2250 2300 S22 (dB) -15.0 -20.0 -25.0 -30.0 2000 2050 2100 2150 2200 2250 2300 Frequency (MHz) Frequency (MHz) 8 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D Preliminary SPA-1526Z Evaluation Board Layout and Bill of Materials 850MHz to 910MHz Application Circuit (VCC and VPC =5.0V) C1 Input Output R2 R3 R1 125871 SOF-26 Vpc Bill of Materials Q1 R1 R2 R3 C1 C2 C3 C4 C5 C6 C7 L1 L2 L3 PCB SPA-1526Z 825ohm 1% 4.32K ohm 1% 47k ohm TAJA105K020R MCH185CN104KK MCH185A101JK MCH185A101JK MCH185A101JK MCH185A100JK MCH185A8R2JK 0805HQ-48NX_BC LL1608FS-1N5S LL1608FS-2N2S 125871 Vdet 1.0uF 0.1uF 100pF 100pF 100pF 10pF 8.2pF 48nH Coil Craft 1.5nH Toko 2.7nH Toko EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 9 of 14 SPA-1526Z Preliminary Evaluation Board Layout and Bill of Materials 1930MHz to 1990MHz Application Circuit (VCC and VPC =5.0V) C1 Input Q C6 Output C3 0.165 R2 125871 SOF-26 R3 Vpc Bill of Materials Q1 R1 R2 R3 C1 C2 C3 C4 C5 C6 C7 L1 PCB SPA-1526Z 825ohm 1% 4.32K ohm 1% 47k ohm TAJA106K020R MCH185CN104KK 06035J100GBT 06035J100GBT 06035J100GBT 06035J3R9BBT 06035J3R0BBT 0805HQ-20NX_BC 125871 Vdet 10.0uF 0.1uF 10pF AVX 10pF AVX 10pF AVX 3.9pF AVX 3.0pF AVX 20nH Coil Craft 10 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D Preliminary SPA-1526Z Evaluation Board Layout and Bill of Materials 2110MHz to 2170MHz Application Circuit (VCC and VPC =5.0V) C1 Input Q C6 Output C3 C4 R2 R1 R3 125871 SOF-26 Vdet Vpc Bill of Materials Q1 R1 R2 R3 C1 C2 C3 C4 C5 C6 C7 L1 PCB SPA-1526Z 825ohm 1% 4.32K ohm 1% 47k ohm TAJA106K020R MCH185CN104KK 06035J8R2BBT 06035J8R2BBT 06035J8R2BBT 06035J3R3BBT 06035J2R4BBT 0805HQ-20NX_BC 125871 10.0uF 0.1uF 8.2pF AVX 8.2pF AVX 8.2pF AVX 3.3pF AVX 2.4pF AVX 20nH Coil Craft EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 11 of 14 SPA-1526Z Pin 1 2 3 4 5 6 GND Function VBIAS RF IN VPC VDET RF OUT/VCC NC GND Description Preliminary This is the supply voltage for the active bias circuit. This is the RF input pin and has a DC voltage present. An external DC block is required. Power up/down control pin. The voltage on this pin should never exceed the voltage on pin 1 by more than 0.5V unless the supply current from pin 3 is limited<10mA. This is the output port for the power detector. It samples the power at the input of the amplifier. This is the RF output pin and DC connection to the collector. Not connected These pins are DC-connected to the backside paddle. They provide good thermal connection to the backside paddle for hand soldering and rework. Many thermal and electrical GND vias are required as shown in the recommended land pattern. Suggested Pad Layout 4.57 [0.180] 3.07 [0.121] 0.46 [0.018] 4.54 [0.179] 1.65 [0.065] 0.66 [0.026] 0.43 [0.017] 1.14 [0.045] 12 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D Preliminary Package Drawing Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. SPA-1526Z Ordering Information Part Number SPA-1526Z SPA-1526Z-EVB1 SPA-1526Z-EVB2 SPA-1526Z-EVB3 Description Lead Free, RoHS Compliant 850MHz to 910MHz Evaluation Board 1930MHz to 1960MHz Evaluation Board 2110MHz to 2170MHz Evaluation Board Reel Size 7" N/A N/A N/A Devices/Reel 1000 N/A N/A N/A EDS-105847 Rev D 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 13 of 14 SPA-1526Z Preliminary 14 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105847 Rev D |
Price & Availability of SPA-1526Z |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |